Chem-Dry Advantage · Mackay
Mon–Fri 8:30am–5pm Call Craig on 1300 308 926

Tile and grout cleaning in Mackay

Grout is porous, so it soaks up dirt and grime that mopping can’t reach, and the lines go dark even when the tiles look clean. Chem-Dry Advantage uses Chem-Dry’s specialised cleaning solutions and powerful extraction equipment to lift built-up dirt out of tiled floors, bathrooms, showers and kitchen splashbacks across Mackay, Sarina and Airlie Beach. A sealant can then be applied to help keep grime out. Call 1300 308 926 for a quote.

3 Easy Ways to Get Your Free, No-Obligation Quote Today

Mon–Fri 8:30am–5pm After 5pm and on weekends, call or WhatsApp Craig on 0400 163 622.

Why choose Chem-Dry for tile and grout

Three reasons to leave the scrubbing brush in the cupboard.

  1. Pretest first

    The right solution for the surface

    Chem-Dry technicians pretest tile, stone and grout first, which matters most for acid-sensitive stone such as marble, travertine and limestone.

  2. Deep extraction

    Grout lines lifted, not scrubbed

    Specialised cleaning solutions and powerful extraction equipment lift built-up dirt from grout lines that mopping can’t reach.

  3. Optional sealant

    Helps keep grime out

    A sealant can be applied afterwards to help keep grime out, and Chem-Dry says surfaces are ready to use again after only a few hours.

The problem

Tile is tough, but tile, stone and grout are porous and act like a magnet for dirt, dust and grime. Sweeping and mopping keep the worst of it at bay, yet a thin layer of grime builds up over time, mostly in the grout lines. Kitchens, bathrooms, showers and entryways show it first.

Scrubbing grout on your hands and knees is slow, hard work, and household cleaners rarely get the lines back to their original colour.

How Chem-Dry helps

Chem-Dry technicians use specialised cleaning solutions and powerful extraction equipment to blast dirt and build-up out of tile, stone and grout. Chem-Dry’s process usually runs like this:

  • A pretest of your tile, stone or grout, which matters most for acid-sensitive stone such as marble, travertine and limestone
  • Nearby surfaces protected before cleaning starts
  • Dry soil removal, then a deep clean with the right solution for the surface
  • A check of the results, re-cleaning any uneven areas
  • The option of a sealant afterwards, to help keep grime out and make everyday cleaning easier

Chem-Dry says surfaces are clean and ready to use again after only a few hours.

Illustration of floor tiles, with dark, grimy grout on one side and clean grout on the other

Tile and grout cleaning from Sarina to Airlie Beach

Tiled floors are a big part of Queensland homes, and in Mackay they collect beach sand, wet-season mud and everything that comes in from the backyard. Bathrooms and showers stay humid for much of the year, which is hard on grout.

Chem-Dry Australia suggests a professional clean of bathrooms, kitchens and other tiled areas every 12 to 18 months to keep them looking their best. We clean tile and grout in homes, rentals and holiday units across Mackay and surrounds, from Sarina to Airlie Beach and about 50 km inland, and it can be booked in the same visit as a carpet clean.

When you call 1300 308 926, it helps to know

  • Which rooms or areas are tiled (kitchen, bathroom, shower, laundry, patio) and roughly how big they are
  • The type of tile or stone, such as ceramic, porcelain, terracotta, slate, marble or travertine, if you know it
  • Whether the grout has been sealed before
  • Whether you’d like a sealant applied after the clean
Call Craig on 1300 308 926

Questions about tile and grout cleaning

What kinds of tile do you clean?

Chem-Dry’s tile cleaning process suits kitchen and bathroom tile and tiled floors throughout the home, as well as walls, showers and splashbacks. Common materials include porcelain, ceramic, terracotta and stone. If you have something else, call 1300 308 926 and describe it.

Can you clean natural stone like marble or travertine?

Different stone needs different cleaning solutions, so Chem-Dry technicians pretest first. That matters most for acid-sensitive stone such as marble, terrazzo, travertine and limestone. Tell us what you have when you call.

Can you seal the grout after cleaning?

Yes, you can choose to have a sealant applied after the clean. It creates a barrier that helps keep grime out and makes day-to-day cleaning easier.

How often should tile and grout be professionally cleaned?

Chem-Dry Australia suggests every 12 to 18 months for bathrooms, kitchens and other tiled areas. Busy areas such as kitchens and showers may need it more often.

How much does tile and grout cleaning cost?

Every job is quoted free, based on the area, the type of tile and grout, and whether you want it sealed, and you get the full price before we book. See what carpet cleaning costs.

Other services

Get a tile and grout cleaning quote

Call Craig on 1300 308 926, Mon–Fri 8:30am–5pm. Every job is quoted free, and you get the full price before we book.

Mon–Fri 8:30am–5pm After 5pm and on weekends, call or WhatsApp Craig on 0400 163 622.

Prefer not to call? Text 0400 163 622, WhatsApp us or use the online quote form. We reply within 24 hours, 7 days a week.

Call Craig on 1300 308 926
Call Craig · 1300 308 926